motor sport 2011

A battery only requires a little monthly maintenance to perform perfectly. Keep the battery charged to 100%, recharging when the lights dim, the starter sounds weak, or the battery hasn't been used in more than two weeks. Other than that, follow this simple check list every month:

• Check the electrolyte level
• Keep the top free of grime
• Check cables, clamps, and case for obvious damage or loose connections
• Clean terminals and connectors as necessary
• Check inside for excessive sediment, sulfation or mossing
• Make sure the exhaust tube is free of kinks and clogs
• Replace caps firmly

Finish up by testing the battery with either a hydrometer or voltmeter. To extend the service life of your battery, make monthly battery maintenance part of your routine.
If the vehicle is in storage or used infrequently, disconnect the battery cable to eliminate drain from electrical equipment. Charge the battery every two weeks.
For extended storage, remove the battery from the vehicle and charge to 100%. Charge the battery every month if stored at temperatures below 60° F. If stored in a warm area (above 60° F), charge every two weeks. Make sure batteries are stored out of reach of children.

A battery only requires a little monthly maintenance to perform perfectly. Keep the battery charged to 100%, recharging when the lights dim, the starter sounds weak, or the battery hasn't been used in more than two weeks. Other than that, follow this simple check list every month:

• Check the electrolyte level
• Keep the top free of grime
• Check cables, clamps, and case for obvious damage or loose connections
• Clean terminals and connectors as necessary
• Check inside for excessive sediment, sulfation or mossing
• Make sure the exhaust tube is free of kinks and clogs
• Replace caps firmly

Finish up by testing the battery with either a hydrometer or voltmeter. To extend the service life of your battery, make monthly battery maintenance part of your routine.
If the vehicle is in storage or used infrequently, disconnect the battery cable to eliminate drain from electrical equipment. Charge the battery every two weeks.
For extended storage, remove the battery from the vehicle and charge to 100%. Charge the battery every month if stored at temperatures below 60° F. If stored in a warm area (above 60° F), charge every two weeks. Make sure batteries are stored out of reach of children.

A battery only requires a little monthly maintenance to perform perfectly. Keep the battery charged to 100%, recharging when the lights dim, the starter sounds weak, or the battery hasn't been used in more than two weeks. Other than that, follow this simple check list every month:

• Check the electrolyte level
• Keep the top free of grime
• Check cables, clamps, and case for obvious damage or loose connections
• Clean terminals and connectors as necessary
• Check inside for excessive sediment, sulfation or mossing
• Make sure the exhaust tube is free of kinks and clogs
• Replace caps firmly

Finish up by testing the battery with either a hydrometer or voltmeter. To extend the service life of your battery, make monthly battery maintenance part of your routine.
If the vehicle is in storage or used infrequently, disconnect the battery cable to eliminate drain from electrical equipment. Charge the battery every two weeks.
For extended storage, remove the battery from the vehicle and charge to 100%. Charge the battery every month if stored at temperatures below 60° F. If stored in a warm area (above 60° F), charge every two weeks. Make sure batteries are stored out of reach of children.

A battery only requires a little monthly maintenance to perform perfectly. Keep the battery charged to 100%, recharging when the lights dim, the starter sounds weak, or the battery hasn't been used in more than two weeks. Other than that, follow this simple check list every month:

• Check the electrolyte level
• Keep the top free of grime
• Check cables, clamps, and case for obvious damage or loose connections
• Clean terminals and connectors as necessary
• Check inside for excessive sediment, sulfation or mossing
• Make sure the exhaust tube is free of kinks and clogs
• Replace caps firmly

Finish up by testing the battery with either a hydrometer or voltmeter. To extend the service life of your battery, make monthly battery maintenance part of your routine.
If the vehicle is in storage or used infrequently, disconnect the battery cable to eliminate drain from electrical equipment. Charge the battery every two weeks.
For extended storage, remove the battery from the vehicle and charge to 100%. Charge the battery every month if stored at temperatures below 60° F. If stored in a warm area (above 60° F), charge every two weeks. Make sure batteries are stored out of reach of children.

Yuasa Battery Inc. manufactures and offers a complete line of Powersports batteries and accessories.

Conventional batteries (flooded electrolyte) of both 6- and 12-volt varieties are available in capacities and sizes ranging from 2 to 25 AH. The premium “YuMicron” and “YuMicron CX” lines of conventional batteries are available in 12-volt designs and offer a range of performance capacity from 2.5 to 30 AH.

The ultimate in Powersports batteries, the M/F VRLA and High Performance “YTX” and “YTZ” lines of batteries, are available in 12-volt sizes with capacities ranging from 2.3 to 30 AH. Also, many of these M/F products are available as “Factory Activated” and are supplied ready to install, eliminating the need to add acid.

Maintenance Free Absorbed Glass Mat (AGM) Technology is an advanced battery design used in Yuasa's Maintenance Free Batteries that eliminates water loss. Once it's filled with acid the battery is permanently sealed - so you'll never need to fill it with water or check the acid level.

Long Life Because of its lead calcium design, the AGM battery will hold its specific gravity more than three times longer than conventional lead antimony types. This means much longer periods between charges when the battery is used in a standby mode, like winter storage. And to remain factory-fresh the AGM battery is shipped dry along with its own pack of high-gravity acid that's added at the time of installation. Sealed, Non-spillable Once filled with acid from its special packs, the AGM battery is virtually maintenance free. It's totally sealed and all of the acid is absorbed in the special plates and separators, so there is no need to worry about acid leaks on valuable vehicle parts and accessories.

Yumicron The Yuasa YuMicron gives you a powerful advantage. Its high technology separators allow two extra plates per cell to be installed, for a 30% improvement in cranking performance

The Power Advantage This added power is an outstanding benefit for heavily accessorized machines or high compression engines. Its high cranking power is also a real bonus for easier starting.

YuMicron CX The YuMicron CX was the first small engine starting battery to use "lead calcium" technology. This special technology means the YuMicron CX generates more power, requires less maintenance, and lasts longer than any other conventional battery.

More Power Because of its unique design, the CX will generate 5% to 8% more cold cranking amperage than our own high-output YuMicron lead-antimony battery. For high compression machines, this means greater reserve capacity and more starting power. Less Maintenance The YuMicron CX lead calcium technology also reduces water loss, so the CX requires servicing (water filling) only about one-eighth as often as ordinary lead-antimony types. Longer Life The YuMicron CX holds its specific gravity more than three times as long as lead-antimony type batteries resulting in a longer shelf life. This feature means longer periods between charges, especially during winter months.

Conventional A workhorse battery engineered to protect against corrosion, withstand vibration and deliver high cranking power. The industry standard for motorcycles and riding mowers, our Conventional Battery is anything but conventional. This workhorse is for applications requiring operation on uneven surfaces and vibrating environments - even when the weather's dealing its worst. It's the rugged, reliable and dependable battery that customers are looking for! These features are built into our conventional manifold vented battery - and every battery in the YUASA line: Patented separators provide high cranking power Through-partition construction delivers maximum power. Unique sealed posts resist corrosion for longer battery life. Polypropylene cover and container thwart damage from gas, oil, and impact. Heat-sealed, bonded unit fabrication protects against seepage and corrosion.

Yuasa Battery Inc. manufactures and offers a complete line of Powersports batteries and accessories.

Conventional batteries (flooded electrolyte) of both 6- and 12-volt varieties are available in capacities and sizes ranging from 2 to 25 AH. The premium “YuMicron” and “YuMicron CX” lines of conventional batteries are available in 12-volt designs and offer a range of performance capacity from 2.5 to 30 AH.

The ultimate in Powersports batteries, the M/F VRLA and High Performance “YTX” and “YTZ” lines of batteries, are available in 12-volt sizes with capacities ranging from 2.3 to 30 AH. Also, many of these M/F products are available as “Factory Activated” and are supplied ready to install, eliminating the need to add acid.

Maintenance Free Absorbed Glass Mat (AGM) Technology is an advanced battery design used in Yuasa's Maintenance Free Batteries that eliminates water loss. Once it's filled with acid the battery is permanently sealed - so you'll never need to fill it with water or check the acid level.

Long Life Because of its lead calcium design, the AGM battery will hold its specific gravity more than three times longer than conventional lead antimony types. This means much longer periods between charges when the battery is used in a standby mode, like winter storage. And to remain factory-fresh the AGM battery is shipped dry along with its own pack of high-gravity acid that's added at the time of installation. Sealed, Non-spillable Once filled with acid from its special packs, the AGM battery is virtually maintenance free. It's totally sealed and all of the acid is absorbed in the special plates and separators, so there is no need to worry about acid leaks on valuable vehicle parts and accessories.

Yumicron The Yuasa YuMicron gives you a powerful advantage. Its high technology separators allow two extra plates per cell to be installed, for a 30% improvement in cranking performance

The Power Advantage This added power is an outstanding benefit for heavily accessorized machines or high compression engines. Its high cranking power is also a real bonus for easier starting.

YuMicron CX The YuMicron CX was the first small engine starting battery to use "lead calcium" technology. This special technology means the YuMicron CX generates more power, requires less maintenance, and lasts longer than any other conventional battery.

More Power Because of its unique design, the CX will generate 5% to 8% more cold cranking amperage than our own high-output YuMicron lead-antimony battery. For high compression machines, this means greater reserve capacity and more starting power. Less Maintenance The YuMicron CX lead calcium technology also reduces water loss, so the CX requires servicing (water filling) only about one-eighth as often as ordinary lead-antimony types. Longer Life The YuMicron CX holds its specific gravity more than three times as long as lead-antimony type batteries resulting in a longer shelf life. This feature means longer periods between charges, especially during winter months.

Conventional A workhorse battery engineered to protect against corrosion, withstand vibration and deliver high cranking power. The industry standard for motorcycles and riding mowers, our Conventional Battery is anything but conventional. This workhorse is for applications requiring operation on uneven surfaces and vibrating environments - even when the weather's dealing its worst. It's the rugged, reliable and dependable battery that customers are looking for! These features are built into our conventional manifold vented battery - and every battery in the YUASA line: Patented separators provide high cranking power Through-partition construction delivers maximum power. Unique sealed posts resist corrosion for longer battery life. Polypropylene cover and container thwart damage from gas, oil, and impact. Heat-sealed, bonded unit fabrication protects against seepage and corrosion.

Yuasa Battery Inc. manufactures and offers a complete line of Powersports batteries and accessories.

Conventional batteries (flooded electrolyte) of both 6- and 12-volt varieties are available in capacities and sizes ranging from 2 to 25 AH. The premium “YuMicron” and “YuMicron CX” lines of conventional batteries are available in 12-volt designs and offer a range of performance capacity from 2.5 to 30 AH.

The ultimate in Powersports batteries, the M/F VRLA and High Performance “YTX” and “YTZ” lines of batteries, are available in 12-volt sizes with capacities ranging from 2.3 to 30 AH. Also, many of these M/F products are available as “Factory Activated” and are supplied ready to install, eliminating the need to add acid.

Maintenance Free Absorbed Glass Mat (AGM) Technology is an advanced battery design used in Yuasa's Maintenance Free Batteries that eliminates water loss. Once it's filled with acid the battery is permanently sealed - so you'll never need to fill it with water or check the acid level.

Long Life Because of its lead calcium design, the AGM battery will hold its specific gravity more than three times longer than conventional lead antimony types. This means much longer periods between charges when the battery is used in a standby mode, like winter storage. And to remain factory-fresh the AGM battery is shipped dry along with its own pack of high-gravity acid that's added at the time of installation. Sealed, Non-spillable Once filled with acid from its special packs, the AGM battery is virtually maintenance free. It's totally sealed and all of the acid is absorbed in the special plates and separators, so there is no need to worry about acid leaks on valuable vehicle parts and accessories.

Yumicron The Yuasa YuMicron gives you a powerful advantage. Its high technology separators allow two extra plates per cell to be installed, for a 30% improvement in cranking performance

The Power Advantage This added power is an outstanding benefit for heavily accessorized machines or high compression engines. Its high cranking power is also a real bonus for easier starting.

YuMicron CX The YuMicron CX was the first small engine starting battery to use "lead calcium" technology. This special technology means the YuMicron CX generates more power, requires less maintenance, and lasts longer than any other conventional battery.

More Power Because of its unique design, the CX will generate 5% to 8% more cold cranking amperage than our own high-output YuMicron lead-antimony battery. For high compression machines, this means greater reserve capacity and more starting power. Less Maintenance The YuMicron CX lead calcium technology also reduces water loss, so the CX requires servicing (water filling) only about one-eighth as often as ordinary lead-antimony types. Longer Life The YuMicron CX holds its specific gravity more than three times as long as lead-antimony type batteries resulting in a longer shelf life. This feature means longer periods between charges, especially during winter months.

Conventional A workhorse battery engineered to protect against corrosion, withstand vibration and deliver high cranking power. The industry standard for motorcycles and riding mowers, our Conventional Battery is anything but conventional. This workhorse is for applications requiring operation on uneven surfaces and vibrating environments - even when the weather's dealing its worst. It's the rugged, reliable and dependable battery that customers are looking for! These features are built into our conventional manifold vented battery - and every battery in the YUASA line: Patented separators provide high cranking power Through-partition construction delivers maximum power. Unique sealed posts resist corrosion for longer battery life. Polypropylene cover and container thwart damage from gas, oil, and impact. Heat-sealed, bonded unit fabrication protects against seepage and corrosion.

Yuasa Battery Inc. manufactures and offers a complete line of Powersports batteries and accessories.

Conventional batteries (flooded electrolyte) of both 6- and 12-volt varieties are available in capacities and sizes ranging from 2 to 25 AH. The premium “YuMicron” and “YuMicron CX” lines of conventional batteries are available in 12-volt designs and offer a range of performance capacity from 2.5 to 30 AH.

The ultimate in Powersports batteries, the M/F VRLA and High Performance “YTX” and “YTZ” lines of batteries, are available in 12-volt sizes with capacities ranging from 2.3 to 30 AH. Also, many of these M/F products are available as “Factory Activated” and are supplied ready to install, eliminating the need to add acid.

Maintenance Free Absorbed Glass Mat (AGM) Technology is an advanced battery design used in Yuasa's Maintenance Free Batteries that eliminates water loss. Once it's filled with acid the battery is permanently sealed - so you'll never need to fill it with water or check the acid level.

Long Life Because of its lead calcium design, the AGM battery will hold its specific gravity more than three times longer than conventional lead antimony types. This means much longer periods between charges when the battery is used in a standby mode, like winter storage. And to remain factory-fresh the AGM battery is shipped dry along with its own pack of high-gravity acid that's added at the time of installation. Sealed, Non-spillable Once filled with acid from its special packs, the AGM battery is virtually maintenance free. It's totally sealed and all of the acid is absorbed in the special plates and separators, so there is no need to worry about acid leaks on valuable vehicle parts and accessories.

Yumicron The Yuasa YuMicron gives you a powerful advantage. Its high technology separators allow two extra plates per cell to be installed, for a 30% improvement in cranking performance

The Power Advantage This added power is an outstanding benefit for heavily accessorized machines or high compression engines. Its high cranking power is also a real bonus for easier starting.

YuMicron CX The YuMicron CX was the first small engine starting battery to use "lead calcium" technology. This special technology means the YuMicron CX generates more power, requires less maintenance, and lasts longer than any other conventional battery.

More Power Because of its unique design, the CX will generate 5% to 8% more cold cranking amperage than our own high-output YuMicron lead-antimony battery. For high compression machines, this means greater reserve capacity and more starting power. Less Maintenance The YuMicron CX lead calcium technology also reduces water loss, so the CX requires servicing (water filling) only about one-eighth as often as ordinary lead-antimony types. Longer Life The YuMicron CX holds its specific gravity more than three times as long as lead-antimony type batteries resulting in a longer shelf life. This feature means longer periods between charges, especially during winter months.

Conventional A workhorse battery engineered to protect against corrosion, withstand vibration and deliver high cranking power. The industry standard for motorcycles and riding mowers, our Conventional Battery is anything but conventional. This workhorse is for applications requiring operation on uneven surfaces and vibrating environments - even when the weather's dealing its worst. It's the rugged, reliable and dependable battery that customers are looking for! These features are built into our conventional manifold vented battery - and every battery in the YUASA line: Patented separators provide high cranking power Through-partition construction delivers maximum power. Unique sealed posts resist corrosion for longer battery life. Polypropylene cover and container thwart damage from gas, oil, and impact. Heat-sealed, bonded unit fabrication protects against seepage and corrosion.